Friday, March 21, 2014

Heresy-Era Salamanders: Contemptor Ironclad Conversion Complete!

I had this great plan while I was in Vegas for work this past week to work on some update posts and keep everyone apprised of progress...

Anyone else notice how well that didn't work? Apparently the Luxor doesn't think it's important to have WiFi in the rooms. I can't exactly upload photos or a post in that situation. Especially since if I'm not in my room while on that trip, I'm either on the trade show floor working, or with clients at a dinner, or a meeting with clients...you get the point.

...who wants to see pictures? I want to show pictures!

Last we left our interred hero, he was missing one very important part of his wargear; the dreadnought-sized storm shield!

I started by shaping a few different styles and shapes for the shield, from a traditional kite shield to something more akin to a riot shield.

I ended up deciding on a slightly different route, combining the riot shield look with something a little on the heraldic side of things. I ended up created three blanks to play with but sandwiching two layers of plasticard together and then shaping them with my hobby knife. My first design relied heavily on the Forge World brass etch, and while I liked it, I wanted to try something a little more ambitious.

Yup. With three weeks to go, I wanted to go more ambitious. Dangit.

So I refined the look of the cut ins on the other two blanks and set to work sketching on some plasticard I had left over. Utilizing the banner top from the Salamanders named dreadnought from the Badab War, I wanted create a shield with 3-dimensional heraldry and sculpted scale work. I didn't want to just have flattened disks represent the scales though, and while it's a common technique for creating scales, it wasn't enough for me. I started with a flattened disk, but then I gave it some texture with a top lip to the scale, and a small raised inner ridge. Check out the progression below.

I've placed what I originally thought would be the finished version next to both the brass etch concept, and next to my sketched concept.

Needless to say I chose the sculpted one. It just has so much more dimension to it, that I felt it was the clear winner. While that was curing overnight, I also affixed the shield arm to the last blank I had with some green stuff and called it a night. The next day I popped the arm off from the blank since I hadn't glued it on, and then carefully took the green stuff off the arm. After shaping it with a hobby knife, I had a nice base for the mounting of the shield.

Unfortunately, I couldn't leave well enough alone, and decided that the scales needed one more layer of detail. On the drake scale cloaks that the Marines will have, there are often a central line of even larger raised scales, almost a dorsal ridge line of them. Well, of course that meant I had to go in and work those into the shield scales as well, right? So with a touch of glue, I placed a small ball of green stuff on the scales that would be a part of that ridge, took my clay shapers and pushed the GS around until each ridge scale was done. I also refined the look of the back of the shield as well with some power leads and detailing.

Can you tell I'm enjoying the step-by-step quad pictures?

Finally, here is the Ironclad Contemptor on his base, with his arms blue-tac'ed on to give you a better idea how he'll look.

Next up, paint!

- Tim

 

14 comments:

  1. Awwwwww Yeah! Honest to god that is the nicest, most well thought out contemptor I have seen in quite some time. Top notch work man!

    ReplyDelete
    Replies
    1. There was actually alot more I wanted to do with it, in terms of sculpting, but I just don't have the time to do it. the hammer was actually supposed to have a completely different head to it. ah well. Glad you like it so far, Zab!!

      Delete
  2. Awesome conversion, and i love the shield. Well thought out, and it fits the contemptor.
    Now put some paint on! ;)

    ReplyDelete
  3. Freakin' epic! Love how that turned out!

    ReplyDelete
    Replies
    1. Wait til you see what I do with the next Contemptor. He'll be holding and underslung heavy weapon that I can switch out what's what with magnets. THAT will take some engineering, but I can't wait :)

      Delete
  4. Great conversion work mate. Though that shield could almost do with being slightly longer.

    Smashing stuff. This is one of the better Heresy build logs around. The army should come up trumps when its dones.

    ReplyDelete
    Replies
    1. I toyed around with making the shield longer, but from certain angles it just seemed a touch....off. I don't know how else to explain it.

      Really glad you're liking it so far :) I'm hoping I don't end up rushing it and eff'ing it all to hell just cause of time restraints :P

      Delete
  5. You have GOT to replace one of your Cataphractii with a Tartaros wielding the FW Storm Shield and a GW Thunder Hammer. He will be like an exact miniature replica of this Contemptor!

    ReplyDelete
    Replies
    1. HAH! Red, you hit the nail on the head there. that's exactly the look I'm going for. Like I said to Zab, he was supposed to have a completely different head on the hammer, to mimic the cylindrical ones that the Tartaros actually wield. I just ran out of time :P

      Delete
  6. Good. Seeing this and how frikken awesome you've made it and even better than the idea I had in my own head, gives me even less reason to buy one for myself. My wallet says thankyou.

    ReplyDelete
    Replies
    1. LOL. My thanks for the compliment, Dai. Of course in my opinion, that's just a reason for you TO buy the model and convert a better one yourself :)

      Delete
  7. Where did you get the plasticard sheets? This post gave me help in making some of my own storm shields(since they are so hard to find), I'd like to get the right plasticard. Awesome craftsmanship!

    ReplyDelete